Do you really want to know if bike flushing is good or bad? Then reading this article will gives you the answer. Millions deem it best to flush their bike and see this practice as one of the means to care for their bike engine.
To them, it is a necessity to do so in other to wash away the old engine oil. However, many see bike engine flushing as unacceptable and criticize those who do that.
Some say it is pointless because modern engine oils do not require that.
Others, on the other hand, are convinced of the benefits and the necessity. Who is right? Or are both opinions correct?
Before we can decide who is right and wrong, let us discuss engine flushing and how it works.
How does the engine flush work?
A special additive is added to the warm engine. 500ml is enough to treat up to 5 liters of engine oil to flush the engine.
The engine is left idle for several minutes to distribute the addictive well in the engine.
This way, the engine flush reaches all relevant engine parts, such as the camshafts, piston rings, and valve stems.
The so-called detergents, i.e., cleaning additives, dissolve deposits in bores, bearings, and surfaces very effectively.
But that’s not the whole secret. To remove these loosened deposits from the engine, they must be suspended.
Special dispersants take it over. These active ingredients envelop the fine particles and keep them suspended, preventing them from being deposited again.
All loosened and bound particles are removed if the engine oil is removed.
When is Engine Flushing Useful?
Every internal combustion vehicle engine is equipped with very effective motor oils. These high-performance oils originally contain a certain proportion of additives.
An engine flush is unnecessary here, but it does not harm either.
Flushing the engine of vehicles with high mileage and a certain age is sensible and even important.
Older models are often filled with relatively simple engine oils. One of the most commonly used oils is SAE 5w30 engine oil.
It is a very cheap mineral oil. The service life of these cheap motor oils is relatively limited. Also, only a few additives are mixed in here. The risk of deposits and also metallic abrasion is very high.
An engine flush with a special additive is highly recommended in such cases and on such vehicles. The new oil will do the work if the engine is not flushed.
The consequence is very quickly soiled and used engine oil. Even oil that performs very well in the engine oil comparison will be subject to rapid wear under these circumstances.
If you want to spare yourself from engine flushing, you must buy very quality oil that possesses such addictive quality.
Even those who buy motor oil cheaply can pay attention to the components. Manufacturers have made great progress, especially with frequently used oils such as 5w30 motor oil.
If you are unsure which oil meets your requirements, you can find out more online by comparing motor oil prices.
Even if motor oil is cheap, it can be high-quality and effective.