Repairing a concrete vibrator machine involves replacing a faulty component with a new one. Knowing the importance of a concrete vibrator machine will propel you to fix it as soon as it gets damaged.
But how you can repair it will be discussed below
Some systems made up of the concrete vibrator machine are:
- Lubricating system
- Cooling system
- Fuel System
- Ignition system
- Exhaust system
These are the major systems made up of the concrete vibrator machine. Each system has components that make it function.
For the sake of reminders, you can check it down as I will list it below:
- Engine block
- Cylinder head
- Spark plugs
- Flywheel
- Carburator
- exhaust port
- intake manifold
- Speed control
- Rings
- Connecting rod
- Piston
- Rocker’s arm
- Valves
- Tank
- Fuel hose
- On and off switch
- Fuel tap
- Spark coil
- Starter rope
- choke
After knowing the major components of a concrete vibrator machine, we can now talk about how to repair it.
Repair means replacing a damaged component with another one, or if the damaged component is repairable, it can be repaired.
How to repair:
Step 1: You need to identify the damaged component and find a replacement
Step 2: You need tools to carry out your repair. It would help if you had the following tool at least
plier, set of sockets and rachet set, screwdriver, hammer, etc
Step 3: know what you can do and when to call an expert to get it done.
Step 4: if the machine does not start, you need to check the spark plug, coil, Choke, and fuel system.
Step 5: Regular servicing and genuine spare part replacement. Buy the lubricant according to the seasons, e.g., winter and summer
Step 6: Frequently re-tighten bolts and nuts to ensure the machine are ready for work.
Step 7: You can replace the starter rope if the starter accessories are still suitable. But if not, you have to replace the complete starter rope.
Step 8: if the engine is not running smoothly, you can check the fuel system, especially the carburetor.
Step 9: If the engine lacks sufficient power, you can check the engine valves, pistons, and rings.
With these few tips, you have learned how to repair a concrete vibrator machine.
Let’s talk about how to do concrete vibrator machine maintenance.
Maintenance and repair are two different things. As mentioned above, to repair, you are to replace damaged components. But maintenance is carried out in a route way to prevent frequent repair.
Maintenance includes the following:
At every 25 hours, maintenance should be carried out on the concrete vibrator machine.
- Remove the old engine oil
- Servicing of the carburetor
- Replacement of spark plugs
- Check the valve setting, if it requires adjustment
- Check the air cleaner, which is usually a foam type that can be reused.
- You can also check the fuel tank to see if there is dirt and fuel debris, then you can clean the tank.
From this article, you have learned how to repair your concrete vibrator machine and how to do the maintenance.