hydraulic system

Can I replace only a damaged seal in a hydraulic cylinder? The answer is no. You have to replace all of the seals because in no time will the other one get damaged. That was the mistake I made some years back. When my hydraulic cylinder was leaking, I opened the cylinder, and I saw […]

If you bleed your hydraulic system of air, then you need to ask this question: how does air get into the hydraulic system? These are how air gets to the hydraulic system; When my tractor cylinder has a damaged seal, I frequently experience air trapped in my hydraulic system. But as soon as I replaced

There are hoses and pipes in the hydraulic system, but what is the danger of using galvanized pipes in a hydraulic system? The galvanized pipe will corrode and rust, affecting the hydraulic fluid and causing damage to hydraulic components such as a hydraulic pump. When I used galvanized pipe for my hydraulic line, I noticed

Every hydraulic hose needs a sleeve to protect it,  so what is a hydraulic hose sleeve? The hydraulic hose sleeve protects the hose from getting damaged by harsh weather conditions and other things that can damage the hose. When I bought my tractor, some hydraulic hoses were unprotected with sleeves. After some months, I started

You may have seen a boom pump occasionally, and you must have asked yourself, “What is the use of a boom pump? A boom pump is a concrete pump mounted on a truck to pump concrete vertical and horizontal distance When our new office is in construction, it is about 10 stories building, to deliver

If you have seen a boom pump before, you may want to know; what is the basic working principle of a boom pump? The boom pump uses a hydraulic control arm to transfer cement from the concrete mixer to where needed. It works with remote control and has a hydraulic pump that works with the

You may have seen a hydraulic air bleeding valve, but do you ever ask,” How does hydraulic air bleed valve work? It is a valve with a ball and spring, actuated after loosening the valve; the pressure of the oil pushes the ball with the help of the spring so that the air gathered at

How do you find the bore of a hydraulic cylinder? It is a question that deserves an answer. The bore  of a hydraulic cylinder means the diameter of the hydraulic cylinder. Using a dial bore gauge, you can measure your hydraulic cylinder bore. However, it would be best if you emptied the hydraulic cylinder first.

If you are frequently working with a hydraulic hose, then you would like to know the answer to this question; what is the working pressure of a hose? The working pressure is the maximum pressure the hose assembly will be subjected to during the operation, including the spike. I was contacted to fix a burst

How does hydraulic cylinder work with one hose? That is a question that will be thoroughly answered in this article. A single-acting cylinder is only able to move in one direction actively. It is because it only has a hydraulic fluid port on one side. It returns with the help of external forces such as spring.